CARDONE 65-9432 Rear Driveshaft Manual Trans 082617563697 5-SPEED

( Brand: Cardone ), ( Manufacturer Part Number: 65-9432 ), ( Part Type: Driveshaft Manual Tran ), ( Placement On Vehicle: Rear ), ( UPC: 082617563697 )

Review CARDONE Rear Driveshaft Ford 5-speed Manual Trans fits RANGER 4WD 1986

The **Cardone 65-9432 Rear Driveshaft** is a meticulously engineered, high-performance replacement part designed specifically for the **1986 Ford Ranger 4WD** equipped with a **5-speed manual transmission**, ensuring optimal power transfer and durability for off-road adventures and daily driving alike. Crafted from premium-grade **chromoly steel tubing**, this driveshaft delivers exceptional strength and resistance to bending or fatigue, even under the most demanding conditions, such as heavy towing, aggressive off-roading, or prolonged use in rough terrain. The driveshaft features a **precision-machined universal joint (U-joint) at both ends**, including a **spicer-type yoke on the axle end** and a **flanged yoke on the transmission end**, both of which are designed to minimize vibration and wear while maintaining smooth, reliable operation. The **spicer joint** is sealed with high-quality **grease fittings** and **rubber boots**, preventing dust, debris, and moisture from infiltrating the joint, thereby extending the lifespan of the driveshaft and reducing the risk of premature failure. For added convenience and ease of installation, Cardone has incorporated a **snap-ring retention system** on the transmission end, allowing for quick and secure attachment without the need for specialized tools. This driveshaft is fully compatible with the **Ford Ranger s 5-speed manual transmission** and is built to meet or exceed OEM specifications, ensuring a seamless fit and performance that rivals the factory unit. Whether you're tackling steep climbs, navigating rocky trails, or simply commuting with confidence, the **Cardone 65-9432** provides the robustness and reliability needed to keep your **1986 Ford Ranger 4WD** running strong for years to come.

### **Pros and Cons of buying a Cardone 65-9432 Rear Driveshaft for a 1986 Ford Ranger (4WD, 5-Speed Manual Transmission)**

1. **OEM Replacement Quality** Cardone is a well-known manufacturer that produces driveshafts designed to match or exceed original equipment specifications. This ensures proper fitment, durability, and performance compared to aftermarket knockoffs.

2. **Durability and Longevity** The 65-9432 is built with high-strength materials, including heat-treated shafts and robust universal joints (U-joints), which are designed to withstand the stresses of 4WD use. Properly maintained, it can last the life of the vehicle.

3. **Compatibility** This driveshaft is specifically engineered for the 1986 Ford Ranger with a 5-speed manual transmission and 4WD system. It accounts for the correct spline count, yoke dimensions, and mounting points, reducing the risk of installation errors.

4. **Reduced Vibration and Noise** Cardone driveshafts are often balanced and tuned to minimize vibration, which improves ride comfort and reduces wear on the drivetrain components over time.

5. **Warranty Coverage** Cardone typically offers warranties (often 1 2 years) on their driveshafts, providing some peace of mind against premature failure due to manufacturing defects.

6. **Easier Maintenance** Since it s a direct replacement, replacing the driveshaft is a straightforward process for those with mechanical experience. No major modifications to the vehicle are usually required.

7. **Supports Original Equipment Standards** Using an OEM-replacement part helps maintain the vehicle s value and reliability, especially if you plan to keep the truck long-term or sell it later.

---

1. **Cost** Cardone driveshafts are more expensive than generic aftermarket alternatives. Pricing can range from **$300 $600 **, depending on availability, retailer markup, and whether additional components (like dust covers or snap rings) are included.

2. **Installation Complexity** While not extremely difficult, replacing a driveshaft requires lifting the vehicle, removing the rear axle, and properly aligning the yokes. Those without experience may need to pay for professional installation, adding to the cost.

3. **Potential for Counterfeit Parts** Some sellers may offer "Cardone" driveshafts that are actually counterfeit or lower-quality replicas. Always verify the part number, purchase from reputable dealers, and check for authenticity markings.

4. **Limited Customization** Unlike some aftermarket driveshafts, this is a stock-length replacement. If you ve modified your vehicle (e.g., lifted suspension, longer axle housing), you may need an extended or custom driveshaft, which could require additional purchases.

5. **Weight** Driveshafts are inherently heavy, and this one is no exception. If you re frequently towing or hauling heavy loads, the added weight may slightly reduce fuel efficiency compared to lighter aftermarket options.

6. **Availability Issues** Depending on the region, Cardone parts may not be as widely stocked as more common aftermarket brands. Shipping times could be longer, especially for older model-specific parts.

7. **Potential for Wear Over Time** Even high-quality driveshafts will eventually wear out, especially in severe conditions (off-roading, extreme towing, or neglect). U-joints and splines may require periodic inspection and lubrication.

---

### **Conclusion and Recommendation**

The **Cardone 65-9432 rear driveshaft** is an excellent choice for a **1986 Ford Ranger 4WD with a 5-speed manual transmission** if you prioritize **reliability, durability, and OEM-level performance**. It avoids the risks of poorly made aftermarket parts and ensures proper fitment, which is critical for drivetrain integrity. The upfront cost is justified by its longevity and reduced long-term maintenance concerns.

- **Buy it if:** You want a high-quality, long-lasting replacement with minimal risk of failure, and you re either comfortable installing it yourself or have access to a trusted mechanic. It s especially ideal if you use your Ranger for daily driving, light off-roading, or occasional towing.

- **Consider alternatives if:** You re on a tight budget and can find a **high-quality aftermarket driveshaft** (e.g., from brands like **Mopar, Spicer, or local fabricators**) that fits within a lower price range. However, be cautious of cheap knockoffs that may fail prematurely.

- **Verify authenticity:** Always purchase from **authorized dealers, reputable online marketplaces (with seller ratings), or trusted local parts stores** to avoid counterfeit parts.

- **Inspect before buying:** If possible, examine the driveshaft for manufacturing quality (smooth shaft, properly seated U-joints, no dents or cracks). Request a warranty confirmation.

**Final Verdict:** For most owners of a 1986 Ford Ranger, the **Cardone 65-9432 is the best balance of quality, fitment, and reliability**, making it the recommended choice over cheaper or untested alternatives. Just ensure proper installation and maintenance to maximize its lifespan.

Details:

Rubber parts, gaskets, hardware may need to be replaced and not usable. Or any other minor issue that does not make the part you are buying DEFECTIVE. There may be minor corrosion, scuffs, torn or missing boxes, scratches from storage, etc. Cardone, part number 65-9432.

They may have been in storage anywhere from 1-30 years. If any manufacturer warranty exists, it is between you and them. Shipping:: Free Shipping is for continental USA only. ONCE Purchased YOU OWN IT.

None of which makes the part Defective. Be sure the part you are buying is correct for your application. Sometimes the fitment is so old that it does not take into account trim, engine size or build dates. Note: with 45.75 in Long Driveshaft; Short Wheelbase; Measurement taken from the center line of furthest U-Joint at one end to on, opposite collapsed Prop Shaft; 4WD, Trans: Manual Trans, 5 Speed Trans.

part #: 659432 prices

• $415.99-$431.96

specifications universajoin:

• for models: 4wd, Ranger
• for makes: Ford
• for years: 1986
• brand: Cardone
• mpn: 65-9432
• part type: Driveshaft Manual Tran
• placement on vehicle: Rear
• upc: 082617563697

payments universajoin:

• credit card: Discover
• other
• wallet: Google-pay

seller universajoin:

• # reviews: 267303
• rating: 99.7%
• city: Houston, Texas

general universajoin:

• Transmission Drivetrain > Driveshafts Parts > Driveshafts
• condition: Remanufactured

shipping universajoin:

• type: Fixed
• class: Standard
• cost: $0.00
• service: Standard
• transit: 2-6 Days

offer universajoin:

• availability: In Stock
• options: Ship-to-home
• quantity: 2
• sold: 0
• started: February 4, 2026

returns universajoin:

• time: 30 Days
• policy: Returns Accepted
• paid by: Seller

Cardone 65-9432 Is Similar To:

• 65-1002 Cardone Industries Drive Prop Shaft Rear Reman Fits 884548212916 (39.5% similar) Important note the years and model's listed in offer title do not mean part will fit every single vehicle of that year model. Stock is updated nightly, so it possible that an item shows in but was already sold. Through sat. The item specifics section also contains important details...(December 5th, 2018)
• 65-2001 Cardone Industries Reman Driveshaft 884548182455 (41.2% similar) A-1 Cardone driveshaft prop shaft quantity needed: 1 fitment notes: with long position: front item specifics: upc: 55APPLICATION summary: ford expedition, f Lincoln navigator 2014 -06FEATURES and benefits: unlike other manufacturers, shafts are dynamically balanced, which is superior to static ...(November 14th, 2017)
• 65-2006 Cardone Industries Drive Shaft-driveshaft 884548210455 (35% similar) With long driveshaft position: front item specifics: upc: 55FEATURES and benefits: unlike other manufacturers, Cardone prop shafts are dynamically balanced, which is superior to static balancing, as the unit balanced at typical speed it will experience on vehicle marketing : a1 remanufactured ...(February 7th, 2018)
• 65-3000 Cardone Industries Reman Driveshaft 884548182653 (41.2% similar) Remain driveshaft prop shaft fits dodge charger magnum Cardone A-1 caprice is for 1 - adjust quantity in cart. All units are tested to ensure reliable performance every time. 81 length MM: 350. Cardone A-1 may have supplied the vehicle manufacturer with drive shaft. This listing is for a single ...(November 14th, 2017)
• 65-3003 Cardone Industries Drive Shaft-driveshaft Prop (35.7% similar) On the right side of screen item you bought 'more actions. Measurement method: is taken from the face of flange on one end to other a collapsed prop shaft. Got 'my ' and on purchase history. Original designs are scrutinized and improved to make longer lasting parts. All units are tested to ensure ...(April 5th, 2017)
• 65-3004 Pronto-cardone Industries Drive Shaft-driveshaft (29% similar) Part: 65-3004 prices...(September 30th, 2017)
• 65-3005 Cardone Industries Drive Shaft-driveshaft Prop (35.7% similar) This part fits vehicles made in the following years 2008 , 2009 , 2010 , 2011 , 2012 . All units are tested to ensure reliable performance every time. With 22 long driveshaft position: front item specifics: upc: 2836MARKETING : a1 Cardone remanufactured prop shafts driveshafts are engineered to...(April 1st, 2017)
• 65-3007 Cardone Industries Drive Shaft-driveshaft 884548192829 (35% similar) Measurement method: is taken from the center line of weld on one end to opposite collapsed prop shaft part type: drive shaft application summary: jeep commander, grand Cherokee 2010 -07DRIVE shaft material: Steele-waste: no emission code 1FEATURES and benefits: built meet or exceed. Original ...(September 23rd, 2017)
• 65-3012 Cardone Industries Reman Driveshaft 884548215351 (41.2% similar) All units are tested to ensure reliable performance every time. 31 length MM: 769. Cardone A-1 may have supplied the vehicle manufacturer with drive shaft. This listing is for a single drive shaft. Original designs are scrutinized and improved to make longer lasting parts. Measurement method: is ...(January 24th, 2018)
• 65-3014 Cardone Industries Reman Driveshaft 884548223738 (41.2% similar) All units are tested to ensure reliable performance every time. Measurement method: is taken from the center line of weld on one end to opposite collapsed prop shaft part type: drive shaft application summary: Chrysler aspen dodge drongo 2009 -04DRIVE shaft material: Steele-waste: no emission code ...(January 28th, 2018)
• 65-3500 Cardone Industries Drive Shaft-driveshaft 884548173248 (35% similar) On the right side of screen item you bought 'more actions. 51TUBING outer diameter mm: 63. On 'return this item. Got 'my ' and on purchase history. Measurement method: is taken from the center line of weld on one end to opposite collapsed prop shaft part type: drive shaft application summary: KIA ...(November 3rd, 2017)