GM TRUCKS 26033687 Rear Drive Shaft Driveline 4.3L

( Brand: Gm Trucks ), ( Manufacturer Part Number: 26033687 ), ( Part Type: Driveshaft ), ( Id: 5bb851c5-b631-4da2-96fd-a120198e05d3 ), ( Interchange: 431-4083 )

Review GM TRUCKS Rear Drive Shaft Oem Driveline 4.3l fits BLAZER S10 4X4 1995

The **GM 26033687 Rear Drive Shaft (Driveline) for the 1995 Chevrolet S10 Blazer 4x4 with a 4.3L V6 engine** is a critical and robust component designed to transfer power efficiently from the transfer case to the rear axle, ensuring reliable off-road and on-road performance. This high-quality, factory-spec driveline shaft is engineered to withstand the demands of heavy-duty towing, rugged terrain, and daily commuting, making it an essential replacement for vehicles experiencing wear, leaks, or damage over time. Constructed from durable, heat-treated steel, the shaft features a precision-machined universal joint (U-joint) at the transfer case end and a constant velocity (CV) joint or splined connection at the axle end, depending on the specific application, ensuring smooth and consistent torque transfer while minimizing vibration and wear. The driveline is fully compatible with the 1995 S10 Blazer s 4.3L inline-six engine and 4x4 drivetrain, providing seamless integration with the stock transfer case and rear axle housing. Whether restoring a classic off-roader or upgrading an existing setup, this driveline shaft delivers the strength, durability, and performance expected from General Motors original equipment, ensuring long-lasting reliability for both on-road and off-road adventures. Proper installation, including alignment and balancing, is recommended to maximize efficiency and prevent premature failure.

### **Pros and Cons of Buying a 1995 GM 26033687 S10 Blazer Rear Driveshaft (4.3L 4x4)**

1. **Compatibility** The GM part number **26033687** is a direct replacement for the rear driveshaft in a 1995 S10 Blazer with a 4.3L V6 engine and 4WD system. This ensures an exact fit without modifications.

2. **Reliability** GM s driveshafts from this era were built to last, especially if the vehicle was well-maintained. The 4.3L 4x4 setup is known for durability in off-road and heavy-duty applications.

3. **Ease of Installation** Since it s a stock GM part, installation should be straightforward for someone with basic mechanical skills. No customization or extra hardware is typically required.

4. **Cost-Effective Replacement** Purchasing a new or reconditioned GM driveshaft is often cheaper than buying an aftermarket or used one, especially if sourced from a reputable dealer.

5. **Warranty Coverage** If buying from a dealer or GM-approved supplier, the part may come with a warranty, providing peace of mind against early failure.

6. **Proven Performance** The 4.3L V6 in the S10 Blazer is a robust engine, and the driveshaft is designed to handle its torque output, making it suitable for towing and off-roading if properly maintained.

7. **Availability of Parts** Since this is a common GM part, finding replacement bearings, u-joints, or related components is easier than with rare or discontinued models.

---

1. **Age and Wear** A 1995 vehicle is nearly 30 years old, meaning the driveshaft may already have wear, especially if the vehicle was driven hard or neglected. Rust, bent yokes, or worn u-joints are common issues.

2. **Potential Rust Damage** If the vehicle was driven in wet or salted conditions, the driveshaft could be corroded, requiring additional cleaning or replacement of components like the snap rings or bearings.

3. **No Modern Upgrades** Unlike newer driveshafts, this one lacks modern materials (e.g., high-strength steel, sealed bearings) that improve longevity and reduce noise. Aftermarket driveshafts often include these improvements.

4. **Limited Lifespan Expectation** While GM driveshafts are durable, they typically last **100,000 150,000 miles** under normal conditions. If the vehicle has high mileage, the driveshaft may need replacement soon.

5. **Possible Misalignment Issues** Over time, the driveshaft can become misaligned due to suspension wear or frame damage, leading to vibration or premature failure. A thorough inspection is necessary.

6. **No OEM Warranty** If buying used or from a non-dealer source, there may be no warranty, leaving you responsible for any defects.

7. **Compatibility with Modifications** If the vehicle has been modified (e.g., lifted suspension, larger tires, or performance upgrades), the stock driveshaft may not handle the increased stress, leading to premature failure.

---

Buying a **1995 GM 26033687 rear driveshaft for an S10 Blazer (4.3L 4x4)** is a practical choice if you need a **direct, budget-friendly replacement** and the vehicle is otherwise in good condition. The part is reliable for stock applications and easy to install, making it ideal for basic repairs. However, if the vehicle has high mileage, signs of rust, or has been heavily modified, the driveshaft may not last long and could require additional maintenance.

- **Inspecting the driveshaft thoroughly** (check for rust, bent yokes, worn u-joints, and proper alignment).

- **Replacing u-joints and bearings** if they show wear, even if the driveshaft itself is serviceable.

- **Evaluating the rest of the drivetrain** (transfer case, axles, and suspension) to ensure they are in good condition.

- **Weighing the cost of a used vs. new driveshaft** a new or reconditioned GM part may be worth the investment if the vehicle is a daily driver or used for heavy use.

If the vehicle is a **project car or used for occasional off-roading**, a **new or upgraded aftermarket driveshaft** (with sealed bearings and high-strength materials) could be a better long-term solution despite a higher upfront cost.

- The vehicle is in **moderate condition** (low to moderate mileage, no major rust or damage).

- You need a **quick, affordable replacement** without modifications.

- You plan to **replace u-joints and bearings** as part of the repair.

- The vehicle has **high mileage or signs of abuse**.

- You plan to **modify the suspension or tires**, which could stress the stock driveshaft.

- You want **longer-lasting performance** with modern materials.

Always **inspect the driveshaft before purchase** (if buying used) and **replace worn components** to ensure safe and reliable operation.

Details:

Rear Drive Shaft. Model: BLAZER S10/JIMMY S15. Search for more parts BLAZER S10/JIMMY S15.

part #: 26033687 prices

• $125.57-$399.95

specifications universajoin:

• for models: S10, 4x4, Blazer
• for years: 1995
• brand: Gm Trucks
• mpn: 26033687
• part type: Driveshaft
• id: 5bb851c5-b631-4da2-96fd-a120198e05d3
• interchange: 431-4083

seller universajoin:

• city: Brush, Colorado
• # reviews: 15371
• rating: 99.4%

offer universajoin:

• started: March 28, 2026
• sold: 0
• availability: In Stock
• quantity: 1
• best offers: True
• options: Ship-to-home

shipping universajoin:

• class: Standard
• transit: 3-5 Days
• cost: $0.00
• service: Standard
• type: Fixed

returns universajoin:

• paid by: Seller
• time: 30 Days
• policy: Returns Accepted

payments universajoin:

• other
• wallet: Google-pay
• credit card: Mastercard

general universajoin:

• condition: Used
• Transmission Drivetrain > Driveshafts Parts > Driveshafts

Gm Trucks 26033687 Is Similar To:

• Rear Corvette used Drive 10054289-8ym Gm C4 Shaft Trans 84-96 Automatic (28.9% similar) ...(June 1st, 2015)
• 10223032 Gm Corvette Rear Half Shaft Aluminum Auto Or Stick Used (33.6% similar) Why go to dealer and pay a arm leg for the same thing, when you can buy here. I AM's corvette guy since the old age of 17 years and 58 young. Mistakes happen, it is only human. I have been selling this weatherstripping for 20 years incredibly with super satisfied buyers that's why make the claim no ...(January 19th, 2019)
• 10783 Gm Nos Chevrolet Car Truck Drive Shaft Bushing And Seal (37.1% similar) Nos, or new old stock does not mean the part is mint even perfect. This is a discontinued Gm part. Measures ol x od id states only. Gm why settle for reproductions when you can have the original factory item that is meant and will fit your vehicle. Original boxes can be missing a flap or torn. ...(June 27th, 2018)
• 11102301 Gm Chevrolet Oem Cruze Drive Shaft Ring (34.6% similar) Est, Mon to Fri. All airbag modules are also non returnable...(August 11th, 2018)
• 11570807 Gm New Pack Genuine Oem Joint Coupling Bolts (30.3% similar) Genuine oem Gm drive shaft rear u-joint grunion to yoke bolts. Please verify for yourself that this part will work your specific year make model vehicle before purchasing. Fits 08-'15 Buick enclave, 09-'15 Chevy traverse, '07-'15 GMC Acadia, maybe others. In sealed factory package...(May 28th, 2018)
• 12369463 Gm Brand New Genuine Oem Drive Shaft Snap Ring (34.3% similar) All of Tosca's top quality oem replacement parts are backed by a 12 month 12,000 mile warranty...(September 26th, 2018)
• 12385742 Joint Oem-universal Gm (25.5% similar) ...(March 20th, 2015)
• 12456224 Gm Torque Tube Propeller Shaft Driveline Oem Vette Cyl Auto (40.8% similar) Parts that have any electrical pieces or components are not returnable. Please evaluate the carrier FedEx or USA post office, service type, cost and estimated delivery date. If you are outside the 48 contiguous states or need faster delivery service, please before purchasing item...(October 24th, 2018)
• 12471617 Acdelco Gm Original Equipment Drive Shaft Seal (34.3% similar) 3i sport utility 4-DOOR, aery base XXL plus Denali limited linear ls LTZ north faces SLE SLT SS 4-DOOR...(May 10th, 2018)
• 12472424 Bearing Gm Oem Rear-center (26.3% similar) ...(April 13th, 2015)
• Gm Oem 12472452 Rear-center Bearing (19.3% similar) ...(March 24th, 2015)