1. Universal Joints For Sale
  2. sku: 15188821693070773
  3. GM 14041083-XF

GM 14041083-XF Automatic Driveshaft Drive Shaft

fits model: Corvette. year: 1982.

14041083-xf Gm 1982 Corvette With Automatic Driveshaft Drive Shaft Inch One Year Only

( Brand: Gm ), ( Manufacturer Part Number: 14041083-XF ), ( Type: Driveshaft ), ( Oe/oem Part Number: 14041083-xf, 14041083 ), ( Fitment Type: Direct Replacement ), ( Drive Type: Rwd ), ( Country Of Origin: United States ), ( Placement On Vehicle: Rear ), ( Transmission Type: Automatic )

Review GM Automatic Driveshaft Drive Shaft Inch One Year Only fits CORVETTE 1982

The **GM 14041083-XF 1982 Corvette Automatic Driveshaft (Drive Shaft)** is a meticulously crafted, high-performance component designed exclusively for the iconic 1982 Chevrolet Corvette with an automatic transmission, ensuring seamless power transfer from the transmission to the rear wheels. This driveshaft is engineered to deliver optimal durability, precision alignment, and smooth operation, making it an essential upgrade or replacement part for enthusiasts seeking to restore or enhance the performance of their classic L80 or LT1 V8-powered Corvette. Constructed from high-grade steel, the driveshaft features a robust universal joint (U-joint) at the transmission end and a constant velocity (CV) joint at the axle end, allowing for smooth articulation and reduced wear during aggressive driving or off-road adventures. The XF designation indicates a specific length and alignment tailored to the 1982 model year, ensuring proper clearance with the suspension, exhaust, and underbody components while maintaining optimal torque transfer. Whether installed in a showroom-ready classic or a high-performance street machine, this driveshaft is built to withstand the demands of daily driving, track use, or restoration projects, offering a perfect balance of strength, reliability, and compatibility. Its precise engineering ensures minimal vibration and noise, contributing to a refined driving experience while preserving the integrity of the drivetrain. For collectors and performance-minded owners, this driveshaft is a must-have component to maintain the authenticity and performance of their 1982 Corvette, bridging the gap between classic engineering and modern expectations.

The **GM 14041083-XF 1982 Corvette automatic driveshaft** (also known as the rear driveshaft) is a part that connects the transmission to the rear axle in a 1982 Corvette with an automatic transmission (L34 or L78). Below is a detailed analysis of its pros and cons, followed by a conclusion and recommendation.

---

### **Pros of Buying a Used/Aftermarket 1982 Corvette Automatic Driveshaft (14041083-XF)**

1. **Compatibility and Fitment**

- This driveshaft is designed specifically for the **1982 Corvette with an automatic transmission (L34 or L78)**. It will fit without modification, assuming the vehicle s drivetrain components (transmission, axle, and mounting points) are in good condition.

- The **XF designation** indicates it is for the **right-side driveshaft** (driver s side), which is the more commonly replaced part due to wear over time.

2. **Performance and Durability (If New or Well-Maintained)**

- Original GM driveshafts were built to last, especially if the vehicle was well-maintained. A **new or high-quality aftermarket replacement** can restore proper driveline function and prevent vibrations or clunks.

- The driveshaft is constructed with **heavy-duty tubing and universal joints**, which are designed to handle the torque of the L34/L78 engines (250 300 lb-ft).

3. **Prevents Driveline Issues**

- A failing driveshaft can cause:

- **Clunking or rattling noises** when shifting or accelerating.

- **Vibrations** through the floor or seat, especially at higher speeds.

- **Transmission or axle damage** if the driveshaft detaches or breaks.

- Replacing it proactively can avoid these problems and extend the life of the transmission and rear axle.

4. **Aftermarket Options for Customization**

- Some aftermarket manufacturers offer **stiffer or balanced driveshafts**, which can reduce vibrations in modified Corvettes (e.g., with performance exhaust or suspension changes).

- **Balanced driveshafts** (especially for high-RPM applications) can improve smoothness and reduce wear on the universal joints.

5. **Easier to Source Than Original GM Parts**

- While original GM driveshafts are rare and expensive, **aftermarket or rebuilt units** are more widely available, often at a fraction of the cost of a new GM part.

---

### **Cons of Buying a Used/Aftermarket 1982 Corvette Automatic Driveshaft**

1. **Quality Variability (Especially with Used Parts)**

- **Used driveshafts** may have:

- **Worn universal joints** (grease leaks, play, or damage).

- **Bent or cracked tubing** from accidents or rough handling.

- **Misaligned yokes** leading to vibrations.

- Without a thorough inspection, a bad driveshaft can cause **immediate or future driveline issues**.

2. **Potential for Mismatched Parts**

- Some aftermarket driveshafts may not match the **exact length or angle** of the original GM part, leading to:

- **Clearance issues** with the frame or exhaust.

- **Stress on the universal joints** if not properly aligned.

- Always verify that the driveshaft is **compatible with your specific transmission (L34/L78) and axle housing**.

3. **Labor-Intensive Installation**

- Replacing a driveshaft requires:

- **Removing the transmission or axle** (depending on approach).

- **Disconnecting the driveshaft from the transmission yoke and axle flange**.

- **Balancing the driveshaft** (critical for smooth operation).

- This is **not a beginner-friendly job** and may require **specialized tools** (e.g., a driveshaft balancer).

4. **Cost Considerations**

- **New GM driveshafts** (if available) are **extremely expensive** (often **$1,000 $1,500 **).

- **Aftermarket driveshafts** range from **$300 $800**, depending on quality.

- **Used driveshafts** can be found for **$100 $300**, but risk is higher.

- **Labor costs** (if not DIY) can add **$200 $500**, depending on the shop.

5. **Risk of Vibrations or Noise if Not Properly Balanced**

- Even a **new or rebuilt driveshaft** must be **dynamically balanced** to prevent vibrations at speed.

- An **unbalanced driveshaft** can cause:

- **Excessive wear** on the universal joints.

- **Transmission or axle strain**.

- **Uncomfortable ride quality**.

6. **Potential for Counterfeit or Low-Quality Aftermarket Parts**

- Some sellers offer **cheap, poorly made driveshafts** that fail quickly.

- **Universal joints** may be **under-greased or made from soft materials**, leading to premature failure.

- Always **check reviews, warranties, and material quality** before purchasing.

---

### **Conclusion**

The **1982 Corvette automatic driveshaft (14041083-XF)** is a **critical but often overlooked component** that, when failing, can lead to **driving hazards, transmission damage, and costly repairs**. While it is a **necessary replacement** if symptoms (noise, vibration, clunking) are present, the **quality and source of the replacement part** significantly impact long-term reliability.

- **Best option:** A **new or high-quality aftermarket driveshaft** from a **reputable manufacturer** (e.g., **Eagle, Jegs, or Corvette-specific suppliers**) that offers a **warranty** and **dynamic balancing**.

- **Budget option:** A **used driveshaft from a trusted source** (e.g., a **known Corvette parts dealer**) with a **detailed inspection** for wear, balance, and alignment.

- **Avoid:** **Cheap, unbalanced, or poorly sourced driveshafts** that may fail quickly and cause further damage.

---

### **Recommendation**

1. **If symptoms exist (noise, vibration, clunking):**

- **Replace the driveshaft immediately** to prevent transmission or axle damage.

- **Choose a new or aftermarket driveshaft** from a **well-reviewed supplier** (e.g., **Jegs, Corvette Specialists, or a local Corvette parts shop**).

- **Have it dynamically balanced** before installation to ensure smooth operation.

2. **If the driveshaft is functioning but worn:**

- **Monitor it closely** if it s nearing failure, replace it **preventively**.

- Consider **upgrading to a stiffer or balanced driveshaft** if the vehicle is modified (e.g., with a **performance exhaust or lowered suspension**).

3. **DIY vs. Professional Installation:**

- If comfortable with **transmission/axle work**, **DIY installation** is possible but **requires patience and precision**.

- If unsure, **hire a reputable mechanic** familiar with Corvette drivelines to ensure proper alignment and balancing.

4. **Where to Buy:**

- **Aftermarket (Best Quality):** Jegs, Corvette Specialists, Eagle, or **eBay (verified sellers)**.

- **Used (Budget Option):** **Corvette forums (like Corvette Forum), Facebook Marketplace, or local parts shops** **always inspect before buying**.

- **Avoid:** Random eBay sellers with no reviews or **parts from unknown sources**.

5. **Final Note:**

- A **properly installed and balanced driveshaft** will **eliminate driveline noise, prevent vibrations, and extend the life of your transmission and axle**.

- **Skipping this repair or using a poor-quality part** can lead to **expensive repairs down the road**, so **prioritize quality and professional installation** if unsure.

Would you like recommendations for specific suppliers or installation tips?

Details:

1982 Corvette with an automatic GM driveshaft drive shaft, specifically part number 14041083-XF. It is designed for rear-wheel drive vehicles with automatic transmission, making it a unique and specific fitment that particular model year. #6862MATT ONE YEAR ONLY, 1982 CORVETTE WITH AUTOMATIC TRANSMISSION. This drive shaft is a direct replacement and was manufactured by GM in the USA.

part #: 14041083 price

  • $295.00

specifications universajoin:

  • for models: Corvette
  • for years: 1982
  • brand: Gm
  • mpn: 14041083-xf
  • type: Driveshaft
  • oe/oem part number: 14041083-xf, 14041083
  • fitment type: Direct Replacement
  • drive type: Rwd
  • country of origin: United States
  • placement on vehicle: Rear
  • transmission type: Automatic

shipping universajoin:

  • class: Standard
  • carrier: USPS
  • transit: 4-9 Days
  • type: Calculated
  • service: USPS Ground Advantage
  • cost: $38.55

general universajoin:

  • Transmission Drivetrain > Driveshafts Parts > Additional Driveshaft Parts
  • condition: Used

offer universajoin:

  • availability: In Stock
  • quantity: 1
  • started: March 28, 2026
  • sold: 0
  • options: Ship-to-home

payments universajoin:

  • wallet: Paypal
  • credit card: Diners-club
  • other

returns universajoin:

  • time: 30 Days
  • policy: Returns Accepted
  • paid by: Buyer

seller universajoin:

  • rating: 99.9%
  • # reviews: 8752
  • city: Cincinnati, Ohio
for models: corvette, for years: 1982, type: driveshaft, oe/oem part number: 14041083-xf, 14041083, fitment type: direct replacement, drive type: rwd, country of origin: united states, placement on vehicle: rear, transmission type: automatic,
category: auto parts > transmission drivetrain > driveshafts parts > additional driveshaft parts, sku: 15188821693070773,
Gm 14041083 Is Similar To:
universajoin logo
1 offer $295.00 USD
  • Used. Offer #1 priced at $295.00 + $41.25 shipping estimate = $336.25* total. NO YOKE AND WILL NEED NEW UNIVERSAL JOINTS. 1982 Corvette with an automatic GM driveshaft drive shaft, specifically part number -XF.+$41.25 shipping

Copyright © universajoin.com